ANDROID 4.2.2 STOCK ROM FOR SAMSUNG GALAXY ACE 3 GT-S7270
FILES REQUIRED FOR FLASHING STOCK ROM:
Download the required files by using link below.
PRE-REQUISITES FOR INSTALLING ROM:
Before installing rom make sure that all things are in place, required for flashing rom.
- Make sure that device is properly charged upto 60%.
- We need a laptop or pc with Samsung Galaxy Ace 3 latest usb drivers.
HOW TO FLASH ANDROID 4.2.2 STOCK ROM FOR SAMSUNG GALAXY ACE 3 GT-S7270:
A step-by-step guide with picture for installing rom.
- Make sure you download the correct stock rom of your desired region.
- Turn on the USB debugging mode by going into this setting of device.(if your device in not bricked).
- Now Switch Off your device.
- Now reboot your device into DOWNLOAD MODE by pressing Volume Down key + Power key + Home Key.
- After appearing Samsung logo release the buttons.
- Now your device ask for confirmation, confirm it by pressing VOLUME UP Key.
- Now your device is in download mode, now connect your device to laptop/pc via usb cable.
- Now launch ODIN (administrator).
- On successful connection you will see ID:COM will turn yellow or blue as shown in image below.
- Select the rom file in PDA section as shown in image below.
- Tick Auto Reboot and F.Reset Time (if untick) as shown in image above.
- Click start and relax.
- On successful flash, the ID:COM section becomes green as shown in image below.
- Your Device will auto reboot, now disconnect usb cable and have fun with stock/factory Ace 3.
So, this was a complete step-by-step tutorial for flashing android 4.2.2 stock rom for samsung galaxy ace 3 gt-s7270.. I hope it helped, if not then try this whole process once again, if still the problem exist, check whether proper drivers are installed or not.
So, this was a simple tutorial on How to flash stock rom for Samsung Galaxy Ace 3 GT-S7270.
Download roms from upload.net (platform) and don’t download with IDM use browser downloader, if IDM automatically shows download bar use this link to prevent IDM from downloading.